If your carpet has been damaged by water? you need to dry it as soon as possible. Read 5 ways to dry water damaged carpet and prevent mold growth in this post.
If you are trying to dry a small piece of carpet by yourself, make sure to remove it immediately from the area where water is puddled, and allow it to dry naturally by direct exposure to sunlight. On the other hand, if the carpet you are trying to dry is a large one such as wall to wall carpeting, then you need professional skills and knowledge.
How to Dry Water Damaged Carpets
In today’s article we will share 5 best ways to dry water damaged carpet quickly and efficiently. Follow these methods to dry your carpets and reduce the risk of mould and mildew.
Towels
You can use towels for drying small to medium sized water damaged carpets. If the water has not soaked into the padding yet, the easiest and quickest way to absorb residue water is by covering the entire surface or the affected area with towels.
Then, walk over the towels repeatedly to soak up water using your body weight. Remove and replace the towels once they are completely soaked and keep at it until the carpet is properly dried.
Don’t forget to check the carpet base and see if its padding is soaked too. If such is the case, you need to dry it by placing towels beneath the carpet.
Wet/Dry Vacuum Cleaners
Professional carpet technicians use specialised wet/dry vacuum cleaners to suck up residue water from carpets without damaging their soft fibres. It should be noted that you need either a wet/dry or an industrial grade vacuum cleaner to remove water from carpets. A regular vacuum doesn’t have enough power to suck moisture from deep fibres; in such cases, it is better to just call Carpet Water Damage Restoration Services in Melbourne. Moreover, regular vacuum cleaners are made for dry debris only. Using them to pull water can result in malfunction and serious damage.
Vacuum the affected areas in a uniform motion and check progress from time to time. Even when you feel that water is completely removed from the surface of the carpet, it does not mean your job is done. A wet/dry vacuum cleaner will not suck water from the carpet base through its top layer. You have to lift and turn over the carpeting to dry its padding.
Forced Evaporation
Forced evaporation is a time saving, yet effective method of drying carpets. This technique can also be used to increase the efficiency of wet/dry vacuum cleaners and towels.
Increase the air circulation in your premises as much as possible. Open all windows and doors. Make use of household fans, air movers, dehumidifiers, and even hair dryers for specific water damaged portions.
Once done, check the carpet base to make sure it has dried properly. If not, turn over the carpet and repeat the process.
Drying Wall to Wall Carpets
If water has spread throughout your wall to wall carpeting, you need more than just a vacuum cleaner and some towels to dry it properly.
Follow The Steps given Below to Dry a Wall to Wall Carpet:
- First of all, you have to get rid of all furniture placed on top of spoiled carpet. The damage caused by their pressure increases if the carpet is soaked in contaminated water.
- Use towels to soak as much water as possible from carpet surface.
- Suck up the residue water using a powerful wet/dry vacuum cleaner. Move it in a uniform motion to avoid scratching the wet carpet surface. You can rent industrial and wet/dry vacuum cleaners from local professional cleaning agencies.
- Use pliers to remove staples from corners of carpet. Life each corner slowly and carefully.
- Be careful not to scrape the carpet fabric, as it will make putting it back a lot tougher.
- Fold every corner further until you can see the padding properly.
- Use fans and dehumidifiers to dry out the base. If the floor beneath carpet seems wet, dry it using towels and vacuum cleaners. Note that even a few drops of water are enough for mould to thrive.
- You can also attach a hose to your hair dryer and place its free end underneath the carpet. Push it as far as you can. This will ensure a steady flow of hot air to the carpet padding, allowing it to rise up and dry more quickly.
Call Our Professionals
Our final tip, leave this job to the professionals. When it comes to taking care of and restoring carpets, Flood Water Damage Restoration is a renowned name in Melbourne. Our carpet technicians are trained and experienced in dealing with all types of water damage in carpets.Call us today to Schedule an Appointment and get a free quote of our services. You can also get in touch with our experts by filling out the small contact form on the right side of your screen. Our team will get back to you in no time at all. We provide 24/7 emergency carpet cleaning, carpet drying, and carpet restoration services.